#Debian

PC Engines APU2 netboot Debian installation

Published at March 26, 2016 · Piotr Król ·  3 min read

In previous post I described how to setup PXE server and boot Debian installer using it. I mentioned that provided setup is limited and some extensive configuration is needed to make it useful for real world example. Since that time I learned that there is chain command in iPXE, which give ability to use arbitrary TFTP server as boot file source. Using RPi PXE server For example by changing my test network topology from previous post to something like that:...


virtualbox-dkms: fix alloc_netdev problems when compiling with 3.17.0-rcX headers

Published at September 20, 2014 · Piotr Król ·  4 min read

Intro Because of my bug hunting approach of using latest kernel I experienced problem with compiling VirtualBox modules with 3.17.0-rc5 version on my Debian Jessie. Issue is well known and described for examples here. Problem manifest itself with: ------------------------------ Deleting module version: 4.3.14 completely from the DKMS tree. ------------------------------ Done. Loading new virtualbox-4.3.14 DKMS files... Building only for 3.17.0-rc5+ Building initial module for 3.17.0-rc5+ Error! Bad return status for module build on kernel: 3....


How to fix backlight issue on IdeaPad y510p

Published at August 23, 2014 · Piotr Król ·  1 min read

Today I decide to switch to latest kernel (3.17-rc1) on my IdeaPad y510p. I hit only one annoying problem until now - after booting my main screen was dimmed. I tried all instructions from top google hits for all possible configurations of keywords linux, y510p, backlight issue, etc. Especially I tried all methods from Arch Wiki. Finally I found solution, by greping modinfo for my Intel graphics card: [23:55:24] pietrushnic:~ $ sudo modinfo i915|grep backlight parm: invert_brightness:Invert backlight brightness (-1 force normal, \ 0 machine defaults, 1 force inversion), please report PCI device ID, subsystem \ vendor and subsystem device ID to dri-devel@lists....


Linux (Debian Wheezy) on Lenovo y510p

Published at May 16, 2014 · Piotr Król ·  4 min read

After long analysis I decide to buy new laptop. I had about $1000 (or 3000PLN) and most important things to me were: i7 CPU - because of performance (of course at least 4700 series) SSD - again performance 17.3” - working space no OS/FreeDos/Linux - I will not pay additional fee to M$ for system that I won’t use Full HD resolution at least 8GB RAM non-glare display First I realize that my budget is to small for such a hardware....


Sqlite3 gem not supported on Heroku

Published at November 18, 2012 · Piotr Król ·  1 min read

When I tried to deploy second part of RoR tutorial to Heroku I get this error: An error occurred while installing sqlite3 (1.3.5), and Bundler cannot continue. Make sure that `gem install sqlite3 -v '1.3.5'` succeeds before bundling. ! ! Failed to install gems via Bundler. ! ! Detected sqlite3 gem which is not supported on Heroku. ! http://devcenter.heroku.com/articles/how-do-i-use-sqlite3-for-development ! ! Heroku push rejected, failed to compile Ruby/rails app To git@heroku....


Prepare for Ruby on Rails on Debian wheezy

Published at November 18, 2012 · Piotr Król ·  3 min read

I start to learn Ruby on Rails. As always when you learn new programming language toolchain is required. In this tutorial I will try to go through toolchain preparation for my Debian wheezy. Of course I based on Vim as my editor of choice. Second requirement will be using some parts of toolchain in latest greatest version. As a beginner point for learning Ruby on Rails I choose this tutorial. I will try to use their methods of setting environment adding my comments where it is needed....




Archives

2019 (7)
2018 (16)
2017 (12)
2016 (10)
2015 (8)
2014 (6)
2013 (14)
2012 (24)