Open Source Firmware on TigerLake platforms - part 1

Published at April 14, 2022 · Michał Żygowski ·  9 min read

This post describes efforts of building open source firmware for Tiger Lake UP3 RVP platform and the problems faced in the process. Tiger Lake is one of the newest Intel processors for which the FSP and EDK2 MinPlatform has been recently released....

Categories: firmware

Porting EDK II to an old Allwinner A13 tablet

Published at January 18, 2022 · Artur Kowalski ·  7 min read

Most ARM SoC's run U-Boot or some custom bootloader. That was the case with Allwinner SoC's, until I started porting EDK II to my A13 tablet. In this post, I will tell you about the current UEFI support status on Allwinner SoC's, my future plans, and how to test UEFI on a compatible device...

Categories: firmware manufacturing

FWTS on ARMv8 platform (HiKey LeMaker version) from scratch

Published at July 25, 2016 · Piotr Król ·  8 min read

This is second post from series about LeMaker version of HiKey board from 96boards Customer Edition family. Previous post focused on describing hardware part. In this post I would like to show how to setup firmware development and testing environment. This post highly rely on 96boards documentation, so kudos to 96boards and LeMaker for providing lot of information for developers. Obtain pre-compiled binaries 1 2 3 4 5 6 7 wget https://builds....

Categories: firmware